Papers in international conferences

[129] Muniz B., Granja J., Azenha M. (2024, April). IFC-Based Platform Prototype for Rule Editing and Code Compliance Check (pp. 134-137). Digital Building Permit Conference (DBP conference 2024). DOI: 10.5281/zenodo.12760552

[128] Filho M. A., Pereira J. M., Azenha M., Sena J. C. (2024, July). Experimental and Numerical Analyses on the thermal distribution within hybrid FRP sandwich panels under different climatic conditions. 21st European Conference on Composite Materials (ECCM21). Vol. 3, pp. 976-983. DOI: 10.60691/yj56-np80

[127] Lourenço P.B, Azenha M., Pereira J. M. (2024, February). The SUBLime Network: Sustainable building lime applications via circular economy and biomimetic approaches. 18th International Brick and Block Masonry Conference (IB2MAC 2024).

[126] Lopes G., Mendes N., Vicente R, Ferreira T., Azenha M. (2022, Sept). Seismic performance assessment of existing URM-RC buildings: a BIM-based methodology. 3rd EUROPEAN CONFERENCE ON EARTHQUAKE ENGINEERING & SEISMOLOGY. BUCHAREST, ROMANIA, 2022

https://hdl.handle.net/1822/89171

[125] Ferreira, C., Schlicke, D., Sousa, C., & Azenha, M. (2023, June). Early-Age to Long-Term Numerical Simulation of Concrete Members Tested in Adjustable Restraining Frames. In International RILEM Conference on Synergising expertise towards sustainability and robustness of CBMs and concrete structures (pp. 995-1007). Cham: Springer Nature Switzerland. https://doi.org/10.1007/978-3-031-33211-1_89 https://hdl.handle.net/1822/88856

[124] Mateus, R., Pinto, F., Fauth, J., Azenha, M., Granja, J., Veludo, R., Muniz, B., Reis, J. and Marques, P. (2023) Improving Regulations for Automated Design Checking Through Decision Analysis Good Practices: A Conceptual Application to the Construction Sector. In: Silva, F.J.G., Pereira, A.B., Campilho, R.D.S.G. (eds) Flexible Automation and Intelligent Manufacturing: Establishing Bridges for More Sustainable Manufacturing Systems. FAIM 2023. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-031-38241-3_19 https://hdl.handle.net/1822/88816

[123] Anil, A., Azenha, M., & Parente, M. A. (2023). Efficient data management in a BIM-based framework for circularity of products and materials. 3rd BIM A+ International Conference in Building Information Modelling, Online. https://doi.org/10.5281/zenodo.10034112 https://hdl.handle.net/1822/88817

[122] Salas, L. F. M., Azenha, M., & Ferrão, J. M. M. (2023). AR-enhanced collaborative environment for Facility Management supported by OpenBIM. 3rd BIM A+ International Conference in Building Information Modelling, Online. https://doi.org/10.5281/zenodo.10034163 https://hdl.handle.net/1822/89498

[121] Almeida, L. G., Azenha, M., Lima, F., & Roux, S. (2023). Contribution to the Revision of the Portuguese Rules of Measurement Towards a Standardized BIM-Based Industry. 3rd BIM A+ International Conference in Building Information Modelling, Online. https://doi.org/10.5281/zenodo.10034135 https://hdl.handle.net/1822/88883

[120] Cabral, R., Oliveira, R., Ribeiro, D., Santos, R., Azenha, M., Rakoczy, A., & Tavares, M. R. (2023). Railway bridge condition assessment based on state-of-the-art reality capture technologies: application to a case study. In EC3 Conference 2023 (Vol. 4, pp. 0-0). European Council on Computing in Construction. http://dx.doi.org/10.35490/EC3.2023.329 https://hdl.handle.net/1822/88890

[119] Parente, M.; Granja, J.; Vieira, V.; Kuzminykh, A.; Díaz-Vilariño, L.; Koenders, E.; van Zijl, G.; Petrik, L.; Sandonis, E.; Azenha, M. (2023). RecycleBIM: a framework for the circularity of construction materials through digital modelling. V International Conference Progress of Recycling in the Built Environment, Weimar, Germany.

[118] R.R. Ribeiro, J. Granja, R. Lameiras, M. Azenha (2023). “A cost-effective micro-controller based system for EMM-ARM tests in cement paste”. In Rilem Bookseries. International RILEM Conference on Synergising Expertise towards Sustainability and Robustness of Cement-based Materials and Concrete Structures (pp. 399–412). doi:10.1007/978-3-031-33211-1_36

[117] Kuzminykh, M. Parente, V. Vieira, J. Granja, M. Azenha (2023). RecycleBIM Approach Towards Integrated Data Management for Circularity: Proof of Concept in a RC Building. In: Jędrzejewska, A., Kanavaris, F., Azenha, M., Benboudjema, F., Schlicke, D. (eds) International RILEM Conference on Synergising Expertise towards Sustainability and Robustness of Cement-based Materials and Concrete Structures. SynerCrete 2023. RILEM Bookseries, vol 43. Springer, Cham. https://doi.org/10.1007/978-3-031-33211-1_23 https://hdl.handle.net/1822/88633

[116] Russo, M. Azenha, J. Granja (2023) Open-Source EMM-ARM Implementation for Mortars Based on Single-Board Computer. In: Jędrzejewska, A., Kanavaris, F., Azenha, M., Benboudjema, F., Schlicke, D. (eds) International RILEM Conference on Synergising Expertise towards Sustainability and Robustness of Cement-based Materials and Concrete Structures. SynerCrete 2023. RILEM Bookseries, vol 43. Springer, Cham. https://doi.org/10.1007/978-3-031-33211-1_34 https://hdl.handle.net/1822/88813

[115] El Sibaii,, R.R. Ribeiro, R. Dias, JR. Pinto, J. Granja, M. Azenha, M. (2023). “Towards standardization of data for structural concrete: Product data templates”. In Rilem Bookseries. International RILEM Conference on Synergising Expertise towards Sustainability and Robustness of Cement-based Materials and Concrete Structures (pp. 263–275). doi:10.1007/978-3-031-33211-1_24

[114] Finco, A. Oliveira, N. Sousa, C. Pinto, J. Granja, M. Azenha (2022). Development of a BIM Model for Facility Management with Virtual/Augmented Reality Interaction. In: Gomes Correia, A., Azenha, M., Cruz, P.J.S., Novais, P., Pereira, P. (eds) Trends on Construction in the Digital Era. ISIC 2022 (published in 2023). Lecture Notes in Civil Engineering, vol 306. Springer, Cham. https://doi.org/10.1007/978-3-031-20241-4_15

https://hdl.handle.net/1822/88857

[113] M. Kheradmand, R. Vicente, M. Azenha, J.B, Aguiar (2022). A New Sustainable System for Piped Water Cooling of Mass Concrete Structures. In: Gomes Correia, A., Azenha, M., Cruz, P.J.S., Novais, P., Pereira, P. (eds) Trends on Construction in the Digital Era. ISIC 2022 (published in 2023). Lecture Notes in Civil Engineering, vol 306. Springer, Cham. https://doi.org/10.1007/978-3-031-20241-4_28

[112] A. Fathi, J.M. Pereira, G. Vasconcelos, M. Azenha (2022) A Cost-Effective Method to Measure Delayed Deformations of Building Materials. 76th RILEM Annual Week and International Conference on Regeneration and Conservation of Structures (ICRCS 2022), Kyoto, Japan, September 3-9. 4 pp.

[111] V. Grigorjev, M. Azenha, N. De Belie (2022). Comparative Evaluation of Properties of Laboratory Test Specimens for Masonry Mortars Prepared Using Different Compaction Methods. In: Bokan Bosiljkov, V., Padovnik, A., Turk, T. (eds) Conservation and Restoration of Historic Mortars and Masonry Structures. HMC 2022 (published in 2023). RILEM Bookseries, vol 42. Springer, Cham. https://doi.org/10.1007/978-3-031-31472-8_40

[110] J. Conceição, R. Faria, M. Azenha, M. Miranda (2021) Construction optimization in arch dams by changing the arrangement of contraction joints: A proposal based on numerical simulations. fib Symposium, 2021-June, pp. 1346 – 1355.

[109] J. Gomes, J. Granja, C. Sousa, C. Ferreira, D. Schlicke, R. Faria, M. Azenha (2021) Long-Term Experimental Campaign on RC Shrinkage Cracking: Conceptualization, Planning and Experimental Procedures. RILEM Bookseries, 31, pp. 141-153. DOI: 10.1007/978-3-030-72921-9_12International RILEM Conference on Early-Age and Long-Term Cracking in RC Structures. CRC2021, ENS Saclay, Paris

[108] C. Ferreira, D. Schlicke, C. Sousa, J. Gomes, R. Faria, M. Azenha (2021) Validation of Thermo-hygro-Mechanical FEM Analysis of Thick Restrained RC Members by Comparison with Experiments. RILEM Bookseries, 31, pp. 291-303. DOI: 10.1007/978-3-030-72921-9_24. International RILEM Conference on Early-Age and Long-Term Cracking in RC Structures. CRC2021, ENS Saclay, Paris

[107] M. Gupta, I. Go, J. Granja, M. Azenha, T. Ishida (2021) Effect of Expansive Additives on the Early Age Elastic Modulus Development of Cement Paste by Ambient Response Method (ARM) (2021) RILEM Bookseries, 31, pp. 319-327. DOI: 10.1007/978-3-030-72921-9_26. International RILEM Conference on Early-Age and Long-Term Cracking in RC Structures. CRC2021, ENS Saclay, Paris

[106] M. Ramesh, C. Briceño, M. Azenha, P.B. Lourenço (2020). Impact of type of mortar on shear bond strength of brick masonry. In Brick and Block Masonry-From Historical to Sustainable Masonry (pp. 591-595). CRC Press

[105] J Gomes, R Carvalho, C Sousa, J Granja, R Faria, D Schlicke, M. Azenha (2020) 3D Thermo-hygro-mechanical simulation of a RC slab under restrained shrinkage and applied loads: influence of the reinforcement ratio on service life behaviour RILEM Spring Convention 2020 – Ambitioning a sustainable future for built environment: comprehensive strategies for unprecedented challenges”, held in Guimarães, 9-14 March 2020. DOI 10.1007/978-3-030-76465-4_29

[104] J Kim, M. Azenha, L Sadowski (2020) Towards the understanding the role of the mix design method in the mechanical behaviour of recycled aggregate concrete at early ages. RILEM Spring Convention 2020 – Ambitioning a sustainable future for built environment: comprehensive strategies for unprecedented challenges”, held in Guimarães, 9-14 March 2020. DOI 10.1007/978-3-030-76547-7_23

[103] M. Kheradmand, R Vicente M. Azenha, JB Aguiar (2020) Performance requirements, challenges and existing solutions of PCM in massive concrete for temperature control RILEM Spring Convention 2020 – Ambitioning a sustainable future for built environment: comprehensive strategies for unprecedented challenges”, held in Guimarães, 9-14 March 2020. DOI 10.1007/978-3-030-76551-4_9

[102]  M. Kheradmand, R Vicente M. Azenha, JB Aguiar (2020) Early age temperature control in mass concrete through incorporation of dispersed Phase Change Materials (PCMs). RILEM Spring Convention 2020 – Ambitioning a sustainable future for built environment: comprehensive strategies for unprecedented challenges”, held in Guimarães, 9-14 March 2020. DOI: 10.1007/978-3-030-76551-4_2 https://hdl.handle.net/1822/67489

[101]  A Rzhvskyi, EA Bil, G Witeck, AL Aquere, RM Lima, JL Granja, M. Azenha (2020) Communication tools used by distributed teams in a BIM learning project. International Symposium on Project Approaches in Engineering Education. Volume 10, 2020, Pages 424-431. 12th International Symposium on Project Approaches in Engineering Education and 17th International Conference on Active Learning in Engineering Education, PAEE/ALE 2020; Asian Institute of Technology (AIT)Bangkok; Thailand; 26 August 2020 through 28 August 2020. http://hdl.handle.net/1822/69007

[100]  M. Ramesh, M. Azenha, P.B. Lourenço (2019) Impact of moisture curing conditions on mechanical properties of lime-cement mortars in early ages 13th North American Masonry Conference, Salt Lake City, USA, 2019.  http://hdl.handle.net/1822/68228

[99]  M. Azenha (2019) Controlling crack formation since early ages: contributions of COST Action TU1404 and research project IntegraCrete. Nordic Workshop: Design and construction of sustainable concrete structures. Causes, calculation and consequences of cracks, October the 16th – 17th, 2019, Oslo, Norway. http://hdl.handle.net/1822/70632

[98]  M. Ramesh, M. Azenha, P.B. Lourenço (2019) Mechanical characterization of lime cement mortars: e-modulus and fracture energy. International Conference on Sustainable Materials, Systems and Structures (SMSS 2019). Durability, monitoring and repair of structures. 20-22 March 2019 Rovinj, Croatia. http://hdl.handle.net/1822/68218

[97]  M. Azenha, C. Sousa, J. Granja, R. Faria, B. Zahabizadeh (2019). Reinforcement design for the combined effect of restrained shrinkage and applied loads in slabs: a design challenge. International Conference on Sustainable Materials, Systems and Structures (SMSS 2019). Challenges in Design and Management of Structures. 20-22 March 2019 Rovinj, Croatia. http://hdl.handle.net/1822/70629

[96]  A Żmij, B. Klemczak, M. Azenha (2019) Consideration of soil temperature in the modelling of early-age mass concrete slab. In: 4th World Multidisciplinary Civil Engineering – Architecture – Urban Planning Symposium. WMCAUS 2019, Prague, Czech Republic, 17-21 June 2019. IOP Conference Series: Materials Science and EngineeringVolume 603, Issue 2, 18 September 2019, Article number 022095 http://hdl.handle.net/1822/70615

[95] C Ponce-Farfán, D. Santillán, M.A. Toledo, M. Azenha (2019) Thermal simulation of concrete dams during construction: effect of the heat exchange mechanisms. Congress on Numerical Methods in Engineering. July 01-03 2019. Guimarães, Portugal. University of Minho. http://hdl.handle.net/1822/70627

[94]  J. Gomes, R. Carvalho, C.F. Sousa, J. Granja, R. Faria, D. Schlicke, M. Azenha (2019) 3D Thermo-hygro-mechanical approach for simulation of the cracking behaviour of a RC slab under the combined effects of applied loads and restrained shrinkage. Congress on Numerical Methods in Engineering. July 01-03 2019. Guimarães, Portugal. University of Minho. http://hdl.handle.net/1822/70625

[93]  J. Conceição, R. Faria, M. Azenha, M. Miranda (2019) Numerical study of arch dams under the construction and operation scenarios. Congress on Numerical Methods in Engineering. July 01-03 2019. Guimarães, Portugal. University of Minho. http://hdl.handle.net/1822/70614

[92]  C. Ferreira, C.F. Sousa, M. Azenha, M. Pimentel, R. Faria (2019) Experimental validation of constitutive models for assessment of the cracking risk at the early ages. Congress on Numerical Methods in Engineering. July 01-03 2019. Guimarães, Portugal. University of Minho. http://hdl.handle.net/1822/70612

[91]  T. Soares, M. Azenha, P.B. Lourenço (2019) Creep modelling for refractory materials used in furnace linings. Congress on Numerical Methods in Engineering. July 01-03 2019. Guimarães, Portugal. University of Minho. http://hdl.handle.net/1822/70610

[90]  P.R. Prakash, J.M. Pereira, M. Azenha, P.B. Lourenço (2019) Finite element based micro modelling of masonry structures subjected to fire. Congress on Numerical Methods in Engineering. July 01-03 2019. Guimarães, Portugal. University of Minho. http://hdl.handle.net/1822/68137

[89]  P.J.S. Cruz, M. Azenha, R. Mateus, T Magalhães, J. Granja, R. Lobão (2019) BIM as a tool for setting and infrastructure management. The 5th International Workshop on UI GreenMetric World University Rankings (IWGM 2019). Sustainable University in a Changin World: Lessons, Challenges and Opportunities. University College Cork, Ireland. 14-16 April 2019. http://hdl.handle.net/1822/62988

[88]  M.J. Morais, M.G. Masciotta, L.F. Ramos, D.V. Oliveira, M. Azenha, E.B. Pereira, P.B. Lourenço, T.C. Ferreira, P. Monteiro (2019) A proactive approach to the conservation of historic and cultural Heritage: The HeritageCare methodology. IABSE Symposium, Guimaraes 2019: Towards a Resilient Built Environment. http://hdl.handle.net/1822/66444

[87]   L.F. Ramos, M.G. Masciotta, M.J. Morais, M. Azenha, T. Ferreira, E.B. Pereira, P.B. Lourenço (2018) HeritageCARE: Preventive conservation of built cultural heritage in the South-West Europe. Innovative Built Heritage Models, Edited contributions to the International Conference on Innovative Built Heritage Models and Preventive Systems (CHANGES 2017), February 6-8, 2017, Leuven, Belgium 186pp Publisher: CRC Press. Editors: Koenraad van Balen, Aziliz Vandesande. https://doi.org/10.1201/9781351014793-16 ISBN: 9781351014786 http://hdl.handle.net/1822/58492

[86]   H. Mazaheripour, R. Faria, M. Azenha, G. Ye, E. Schlangen. (2018) Microstructure-based 3d modelling of diffusivity in sound and cracked cement paste. 72nd RILEMWEEK 2018 & CONMOD2018 International Symposium on Concrete Modelling. Delft, Netherlands, 26-29 August 2018. http://hdl.handle.net/1822/58510

[85]   J. Gomes, M. Azenha, J. Granja, R. Faria, C. Sousa, B. Zahabizadeh, A. Edalat-Behbahani, D. Schlicke (2018) Proposal of a test set up for simultaneous application of axial restraint and vertical loads to slab-like specimens: sizing principles and application. SynerCrete’18 International Conference on Interdisciplinary Approaches for Cement-based Materials and Structural Concrete. 24-26 October 2018, Funchal, Madeira Island, Portugal. http://dx.doi.org/10.5281/zenodo.1405563 ISBN:  978-2-35158-202-2 http://hdl.handle.net/1822/58473

[84]   C. Sousa, M. Azenha, C. Ferreira, R. Faria (2018) Parametric study of the minimum required reinforcement for cracking control in thick restrained RC members based on thermo-hygro-mechanical FE analyses. SynerCrete’18 International Conference on Interdisciplinary Approaches for Cement-based Materials and Structural Concrete. 24-26 October 2018, Funchal, Madeira Island, Portugal. http://dx.doi.org/10.5281/zenodo.1405563 ISBN:  978-2-35158-202-2  http://hdl.handle.net/1822/58507

[83]   H. Mazaheripour, A. Abrishambaf, R. Faria, M. Azenha, G. Ye (2018) Microstructure-based prediction of thermal properties of cement paste at early ages. SynerCrete’18 International Conference on Interdisciplinary Approaches for Cement-based Materials and Structural Concrete. 24-26 October 2018, Funchal, Madeira Island, Portugal. http://dx.doi.org/10.5281/zenodo.1405563 ISBN:  978-2-35158-202-2 http://hdl.handle.net/1822/58506

[82]   V. Šmilauer, T. Gasch, A. Delaplace, D. Bouhjiti, F. Kanavaris, M. Azenha, L. Lacarrière (2018) Macroscopic hygro-mechanical modeling of restrained ring test – results from COST TU1404 benchmark. SynerCrete’18 International Conference on Interdisciplinary Approaches for Cement-based Materials and Structural Concrete. 24-26 October 2018, Funchal, Madeira Island, Portugal. http://dx.doi.org/10.5281/zenodo.1405563 ISBN:  978-2-35158-202-2  http://hdl.handle.net/1822/58482

[81]   M. Azenha, G. Sousa, J. Matos, J. Sena-Cruz, V. Brito (2018) Integrated application of advanced surveying techniques and BIM for inspection and asset management of reinforced concrete bridges. SynerCrete’18 International Conference on Interdisciplinary Approaches for Cement-based Materials and Structural Concrete. 24-26 October 2018, Funchal, Madeira Island, Portugal. http://dx.doi.org/10.5281/zenodo.1405563 ISBN:  978-2-35158-202-2  http://hdl.handle.net/1822/58508

[80]   M. Azenha, C. Monteiro, R. Morais (2018) A 3D printer of cement mortars based on initial deposition of dry materials. SynerCrete’18 International Conference on Interdisciplinary Approaches for Cement-based Materials and Structural Concrete. 24-26 October 2018, Funchal, Madeira Island, Portugal. http://dx.doi.org/10.5281/zenodo.1405563 ISBN:  978-2-35158-202-2 http://hdl.handle.net/1822/58475

[79]   M. Ramesh, M. Azenha, P.B. Lourenço (2018) Study of early age stiffness development in lime-cement blended mortars. 11th   International Conference on Structural Analysis of Historical Constructions. Cusco, Peru. 11-13 September 2018 http://dx.doi.org/10.1007/978-3-319-99441-3. ISBN 9783319994406 http://hdl.handle.net/1822/58472

[78]   M. Ramesh, M. Azenha, P.B. Lourenço (2018) A systematic study of the effects of lime-cement ratio in the mechanical roperties of blended mortars. 10th International Masonry Conference (IMC) G. Milani, A. Taliercio and S. Garrity (eds.). Milan, Italy, July 9-11, 2018. http://hdl.handle.net/1822/58460

[77]   M. Azenha, J.L. Granja, J. Gomes, R. Carvalho, B. Zahabizadeh, A. Edalat-Behbahani, R. Faria, L. Leitão. C.F. Sousa, D. Schlicke (2018) Performance of RC slabs under the combined effect of applied loads and restrained shrinkage. Sixth International Conference on the Durability of Concrete Structures. 18-20 July 2018. University of Leeds, Leeds, West Yorkshire, LS2 9JT, United Kingdom http://hdl.handle.net/1822/58504

[76]   R. Lameiras, J. Barros, I.B. Valente, M. Azenha (2018) Flexural behaviour of an innovative connection for structural sandwich panels. 8th International Conference on Fibre-Reinforced Polymer (FRP) Composites in Civil Engineering (CICE 2018), Paris 17-19 July 2018 (não tenho que meter pq é do Barros)

[75]   P.J.S. Cruz, M. Azenha (2018) The challenges of adopting BIM for setting and infrastructure management of University of Minho. The 4th lnternational Workshop on UI GreenMetric Semarang, Indonesia, 8-10 April 2018 (não tenho que meter pq é do Paulo Cruz)

[74]   V. Bokan Bosiljkov, M. Serdar, S. Staquet, M. Azenha, (2017) “Progress on testing of mechanical properties of cement based materials – Extended Round Robin Test of COST Action TU1404.” International Conference on Advances in Construction Materials and Systems. 71st RILEM Week. Chennai, India, 3-8 September 2017. http://hdl.handle.net/1822/53845

[73]   H. Mazaheripour, R. Faria, G. Ye, E. Schlangen, J.L. Granja, M. Azenha, (2017) “Microstructure-based modelling prediction of elasticity in hydrating cement paste”. 2nd International RILEM/COST Conference on Early Age Cracking and Serviceability in Cement-based Materials and Structures – EAC2. 12–14 September 2017, ULB-VUB, Brussels, Belgium http://hdl.handle.net/1822/53835

[72]   M. Serdar, S. Staquet, I. Gabrijel, O. Cizer, S. Nanukuttan, V. Bokan-Bosiljkov, E. Rozière, A. Šajna, D. Schlicke, M. Azenha, (2017) “COST Action TU1404: recent advances of the Extended Round Robin Test RRT+”. 2nd International RILEM/COST Conference on Early Age Cracking and Serviceability in Cement-based Materials and Structures – EAC2. 12–14 September 2017, ULB-VUB, Brussels, Belgium. http://hdl.handle.net/1822/53834

[71]  M. Azenha, Rui Faria, J.L. Granja, C.F. Sousa, R. Carvalho, H. Mazaheripour, B. Zahabizadeh (2017) “Thermo-hygro-mechanical modelling of concrete structures in service life: a multi-scale approach in the IntegraCrete project”. 2nd International RILEM/COST Conference on Early Age Cracking and Serviceability in Cement-based Materials and Structures – EAC2. 12–14 September 2017, ULB-VUB, Brussels, Belgium http://hdl.handle.net/1822/53833

[70]   A.M.Matos, J.L.Granja, S. Nunes, J.B. Aguiar, M. Azenha (2017) “NDT Testing of stiffness evolution of UHPFRC since casting”. 2nd International RILEM/COST Conference on Early Age Cracking and Serviceability in Cement-based Materials and Structures – EAC2. 12–14 September 2017, ULB-VUB, Brussels, Belgium http://hdl.handle.net/1822/47621

[69]   J.L.Granja, M. Azenha (2017) “Assessing the mechanical behaviour of concrete before and during setting with a resonance based technique: preliminary prototypes and results”. 2nd International RILEM/COST Conference on Early Age Cracking and Serviceability in Cement-based Materials and Structures – EAC2. 12–14 September 2017, ULB-VUB, Brussels, Belgium http://hdl.handle.net/1822/53832

[68]   J. Conceição, R. Faria, M. Azenha (2017) “Thermo-mechanical analysis of an arch dam monolith during construction”. Congreso de Métodos Numéricos en Ingeniería 3-5 julio 2017, Valencia, Spain. SEMNI, 2017. http://hdl.handle.net/1822/53831

[67]   E. Fairbairn, M. Azenha (2017) “Current developments of RILEM TC 254-CMS ‘Thermal Cracking of Massive Concrete Structures’”. CONCRACK 5 – JCI-RILEM International Workshop on “Control of Cracking of Mass Concrete and Related Issues Concerning Early Age Cracking of Concrete Structures”. 24-26 April 2017 | Institute of Industrial Science, the University of Tokyo. http://hdl.handle.net/1822/53830

[66]   S. Staquet, M. Serdar, B. Delsaute, E. Roziere, D. Schlicke, S. Nanukuttan,  M. Azenha (2017) “Further works on concrete at early age coordinated within COST TU1404 European Project”. CONCRACK 5 – JCI-RILEM International Workshop on “Control of Cracking of Mass Concrete and Related Issues Concerning Early Age Cracking of Concrete Structures”. 24-26 April 2017 | Institute of Industrial Science, the University of Tokyo. http://hdl.handle.net/1822/53829

[65]   B. Klemczak, A. Zmij, M. Azenha (2017) “Numerical Study on Restraints Effects in Massive Foundation Slabs”. International Conference on Analytical Models and New Concepts in Concrete and Masonry Structures AMCM’2017. Gliwice, Poland. June 5-7 2017. Procedia  Engineering 193 ( 2017 ) 226 – 233. https://doi.org/10.1016/j.proeng.2017.06.208 http://hdl.handle.net/1822/53828c

[64]   J. Sena-Cruz, P. Fernandes, M. Coelho, P. Silva, J. Granja, A. Benedetti, M. Azenha, L. Neves (2016) “Bond on NSM CFRP systems: recent contributions on durability, quality control and design”. 8th International Conference on Fibre-Reinforced Polymer (FRP) Composites in Civil Engineering (CICE 2016). Hong Kong, China, 14-16 december 2016.           http://hdl.handle.net/1822/43901

[63]   L. Charpin, J. Sanahuja, NC Tran, L. Petit, O. Bremond, J. Montalvo, M. Azenha, J.L. Granja (2016) “Multiscale modeling of hydration, elasticity and creep of VeRCoRs concrete. Focus on creep characteristic times.” Technological innovations in nuclear civil engineering TINCE 2016. September 6-9, Paris, France. http://hdl.handle.net/1822/43589

[62]   M. Oliveira, M. Azenha, P.B. Lourenço (2016) “Numerical simulation of humidity fields in concrete considering the Model Code formulation”. International RILEM Conference on Materials, Systems and Structures in Civil Engineering. Conference segment on Moisture in Materials and Structures. 22-24 August 2016. Technical University of Denmark, Lyngby, Denmark. pp. 213-222 http://hdl.handle.net/1822/43443

[61]   M. Azenha, J.L. Granja (2016) “Monitoring and simulating humidity profiles in concrete elements during drying”. International RILEM Conference on Materials, Systems and Structures in Civil Engineering. Conference segment on Moisture in Materials and Structures. 22-24 August 2016. Technical University of Denmark, Lyngby, Denmark. pp. 115-124 http://hdl.handle.net/1822/43442

[60]   M. Serdar, S. Staquet, D. Schlicke, E. Rozière, G. Trtnik, S. Nanukuttan, M. Azenha (2016) “Extended Round Robin Testing program of COST Action TU1404 – lessons learned from the initial experimental phase”. International RILEM Conference on Materials, Systems and Structures in Civil Engineering. Conference segment on Service Life of Cement-Based Materials and Structures. 22-24 August 2016. Technical University of Denmark, Lyngby, Denmark. pp. 651-664 (Vol 2) http://hdl.handle.net/1822/43460

[59]   J.L. Granja, M. Azenha (2016) “Bender-extender elements for characterization of cement paste at early ages”. International RILEM Conference on Materials, Systems and Structures in Civil Engineering. Conference segment on Service Life of Cement-Based Materials and Structures. 22-24 August 2016. Technical University of Denmark, Lyngby, Denmark. pp. 297-306 (Vol 1) http://hdl.handle.net/1822/43441

[58]   M Kheradmand, M. Azenha, J. Castro-Gomes, J. Aguiar (2016) “Energy saving potential of cement based mortar containing hybrid phase change materials applied in building envelopes”. SCMT4 Sustainable Construction, Materials and Technologies. Las Vegas, USA. August 7-11, 2016. http://hdl.handle.net/1822/43185

[57]   M. Azenha, J. Silva, J.L. Granja, A. Gomes Correia (2016) “A Retrospective View of EMM-ARM: Application to Quality Control in Soil-Improvement and Complementary Developments”. Advances in Transportation Geotechnics 3. The 3rd International Conference on Transportation Geotechnics (ICTG2016), September 2016, Guimarães, Portugal. Procedia Engineering. Volume 143, 2016, Pages 339-346. http://dx.doi.org/10.1016/j.proeng.2016.06.043 http://hdl.handle.net/1822/43439

[56]   J.L. Granja, M. Azenha (2016) “Assessing Viscoelastic Properties of Concrete during its Early Ages through Forced Dynamic Excitation of Test Beams”. 8th International Conference on Concrete Under Severe Conditions – Environment & Loading. 12-14 September 2016. Lecco, Italy. Key Engineering Materials, Vol. 711, pp. 103-110, 2016. doi: 10.4028/www.scientific.net/KEM.711.103 http://hdl.handle.net/1822/43594

[55]   J. Silva, M. Azenha, A. Gomes Correia, L. Rios (2016) “Assessment of small strain stiffness of sand-cement mixture by cyclic and dynamic test methods”. Fourth Geo-China International Conference 2016. ASCE Proceeedings pp. 93-101. doi: 10.1061/9780784480083.013  http://hdl.handle.net/1822/43415

[54]   C. Pereira, J.L. Granja , A. Gomes Correia , C. Ferreira, M. Azenha, S. Nazarian (2016) “Combined bender elements and accelerometers system: Measurement and interpretation” 1st IMEKO TC4 International Workshop on Metrology for Geotechnics, MetroGeotechnics 2016; Benevento; Italy; 17 March 2016 through 18 March 2016.  Pages 75-78. http://hdl.handle.net/1822/45166

[53]   M. Azenha, J.L. Granja, R. Oliveira, R. Faria, L. Leitão (2015) “New experimental insights for better parameter estimation and modelling of concrete at early ages” Proceedings of “SSCS 2015 – Strategies for Sustainable Concrete Structures: Numerical modelling”, Rio de Janeiro, Brazil, December 2015. http://hdl.handle.net/1822/43412

[52]   R. Faria, M. Azenha (2015) “Thermo-mechanical behavior of concrete structures: material characterization and numerical simulation” eBook of presentations of the 2nd Workshop of COST Action TU104 “Focus on modelling of cement-based materials and structures”, Vienna, Austria. http://hdl.handle.net/1822/38703

[51]   M. Azenha, R. Faria, M. Pimentel (2015) “Experience of the team of FEUP/UMinho in the CONCRACK benchmarking program” eBook of presentations of the 2nd Workshop of COST Action TU104 “Focus on modelling of cement-based materials and structures”, Vienna, Austria. http://hdl.handle.net/1822/38702

[50]   M. Azenha, J, Granja, Cyrille Dunant (2015) “EMM-ARM Retrospective and current developments” eBook of presentations of the 1st Workshop of COST Action TU104 “Focus on experimental testing of cement-based materials”, Ljubljana, Slovenia, ISBN 978-3-85125-434-1. DOI: 10.3217/978-3-85125-434-1 http://hdl.handle.net/1822/38690

[49]   M. Azenha, J, Granja (2015) “Characterization of concrete properties at early ages: Case studies of the University of Minho”, CMS Workshop “Cracking of Massive Concrete Structures”, eBook of Presentations (RILEM), March 17 2015, ENS-Cachan, Paris. http://hdl.handle.net/1822/38691

[48]   A. Benedetti, P. Fernandes, J, Granja, M. Azenha, J. Sena Cruz (2015) “Effects of curing temperature on pull-out behavior and stiffness evolution of epoxy adhesives for NSM-FRP applications”, SMAR2015 – Third Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures. 7-9 September 2015, Antalya, Turkey http://hdl.handle.net/1822/37324

[47]   P. Silva, J. Sena Cruz, M. Azenha, G. Escusa (2015) “Experimental investigation on creep behaviour of an epoxy adhesive”, SMAR2015 – Third Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures. 7-9 September 2015, Antalya, Turkey http://hdl.handle.net/1822/37322

[46]   M. Azenha, J. Granja, R. Oliveira (2015) “Innovative Method for the Continuous Monitoring of Concrete Viscoelastic Properties since Early Ages: Concept and Pilot Experiments”, CONCREEP10 – Mechanics and physics of creep, shrinkage and durability of concrete and concrete structures –  TU Wien, Vienna, on the 21st-23rd September 2015. ASCE Proceedings, pp 1371-1380 doi: 10.1061/9780784479346.162 http://hdl.handle.net/1822/38692

[45]   J Granja, M. Azenha, (2015) “Continuous Monitoring of Concrete Mechanical Properties since an Early Age to Support Construction Phasing”, CONCREEP10 – Mechanics and physics of creep, shrinkage and durability of concrete and concrete structures –  TU Wien, Vienna, on the 21st-23rd September 2015. ASCE Proceedings,  pp 1360-1370 doi: 10.1061/9780784479346.161 http://hdl.handle.net/1822/38693

[44]   P. Silva, P. Fernandes; J. Sena-Cruz, M. Azenha, J. Barros. (2014) “Behaviour of concrete elements strengthened with near surface mounted CFRP strips under thermal cycles”, The 7th International Conference on FRP Composites in Civil Engineering – CICE2014, 20-22 August, Vancouver, Canada, 6 pp. http://hdl.handle.net/1822/30191

[43]   P. Silva, P. Fernandes; J. Sena-Cruz, M. Azenha, J. Barros (2014) “Creep behavior and durability of concrete elements strengthened with NSM CFRP strips”, The 7th International Conference on FRP Composites in Civil Engineering – CICE2014, 20-22 August, Vancouver, Canada, 6 pp. http://hdl.handle.net/1822/30189

[42]   P. Fernandes, P. Silva, J. Sena-Cruz, M. Azenha, J. Barros (2014) “Bond and flexural behaviour of a NSM CFRP strengthening system under fatigue loading”, The 7th International Conference on FRP Composites in Civil Engineering – CICE2014, 20-22 August, Vancouver, Canada, 6 pp. http://hdl.handle.net/1822/30195

[41]   P. Fernandes, J. Granja, J. Sena-Cruz, M. Azenha, A. Benedetti. (2014) “A new methodology for assisting quality control of NSM-CFRP systems since very early ages”, The 7th International Conference on FRP Composites in Civil Engineering – CICE2014, 20-22 August, Vancouver, Canada, 6 pp. http://hdl.handle.net/1822/30192

[40]   B. Caires, J.C. Lino, M. Azenha (2014) “BIM Execution Plan Strategy for Collaborative Project Implementation”. BIM International Conference 2014: Chalenges to overcome. October 9-10 2014, Lisbon. http://hdl.handle.net/1822/31037

[39]   E. Fairbairn, M. Azenha (2014) “Numerical analysis of cracking of massive concrete structures: key topics studied in RILEM Technical Committee TC-CMS” CILAMCE 2014. Proceedings of the XXXV Iberian Latin-American Congress on Computational Methods in Engineering. Evandro Parente Jr (Editor), ABMEC, Fortaleza, CE, Brazil, November 23-26, 2014 http://hdl.handle.net/1822/31050

[38]   M. Kheradmand, J.B. Aguiar, M. Azenha (2014) “Assessment of the thermal performance of plastering mortars within controlled test cells” CLB-MCS 2014 – Congresso Luso-Brasileiro de materiais de construção sustentáveis. Guimarães – 5-6-7 March 2014 http://hdl.handle.net/1822/30853

[37]   J. Silva, M. Azenha, A. Gomes Correia, J. Granja, (2014) “Monitorização contínua da deformabilidade de solos estabilizados com cimento desde as primeiras idades em amostras recolhidas diretamente de uma camada piloto”. VII Congresso Luso-Brasileiro de Geotecnia, in Infraestrutura de um futuro sustentável. Goiânia, Brasil. http://hdl.handle.net/1822/31049

[36]   S. Staquet,  M. Azenha, C. Boulay, B. Delsaute, J, Carette, J. Granja, K. Hou, F. Baby (2014) “Maturity testing through continuous measurement of E-modulus: an inter-laboratory and inter-technique study”. Eco-crete, International Symposium on Sustainability, Reykjavic, Iceland, 13-15 August 2014. http://hdl.handle.net/1822/31095

[35]   P. Silva, P. Fernandes, J. Sena Cruz, M. Azenha, J.O. Barros, (2014) “Comportamento à fadiga de elementos de betão reforçados através de sistemas NSM CFRP”. Congresso Brasileiro de Patologia das Construções. 21-23 May 2014, Foz do Iguaçu, Brazil http://hdl.handle.net/1822/29164

[34]   M. Kheradmand, B. Aguiar, M. Azenha (2013) “Experimental analysis of the thermal performance of plastering mortars comprising hybrid phase change materials for increased energy efficiency in buildings”. International Congress Energy and Environment Engineering and Management. 17-19 July 2013, Lisbon, Portugal http://hdl.handle.net/1822/26201

[33]   J. Sena Cruz, P. Silva, P. Fernandes, M. Azenha, J.O. Barros, C. De Sousa, A.T. Teixeira (2013) “Creep behaviour of RC slabs strengthened with NSM CFRP laminate strips under different environmental conditions”. SMAR-2013: 2nd Conference on Smart Monitoring Assessment and Rehabilitation of Civil Structures. 9-11 September 2013, Istambul, Turkey – http://hdl.handle.net/1822/25390

[32]   C. Sousa, J. Barros, M. Azenha, R. Lameiras (2013) “Flexural and shear behavior of precast sandwich slabs comprising thin walled steel fibre self-compacting concrete”,7th RILEM international conference on self-compacting concrete, September 2-4, Paris, France. http://hdl.handle.net/1822/26262

[31]   M. Kheradmand, J.B. Aguiar, M.Azenha (2013) “Thermal performance of plastering mortars comprising hybrid phase change materials for increased energy efficiency in buildings”, International Congress on Energy and Environment Engineering            and Management (CIIEM), July 17-19, Lisbon, Portugal. – http://hdl.handle.net/1822/26201

[30]   M. Oliveira, M. Azenha, P.B. Lourenço (2013) “Application of Multi-Physics Model for the Study of Masonry Structures based in Non-Hydraulic Lime”, Congress of Numerical Methods in Engineering – CMNE 2013, June 25-28, Bilbao, Spain.(only abstract)

[29]   L. Leitão, R. Faria, M. Pimentel, P. Sousa, M. Azenha (2013) “Modelling of post-cracking behaviour of concrete under restrained conditions” (in Portuguese), Congress of Numerical Methods in Engineering – CMN 2013, June 25-28, Bilbao, Spain – http://hdl.handle.net/1822/26227

[28]   J. Sena‐Cruz, P. Silva, P. Fernandes, M. Azenha,J. Barros, C. de Sousa, F. Castro, T. Teixeira (2013) “Creep behavior of concrete elements strengthened with NSM CFRP laminate strips under diferent environmental conditions”, 11th International Symposium on Fiber Reinforced Polymers for Reinforced Concrete Structures (FRPRCS-11). June 2013, Guimarães, Portugal – http://hdl.handle.net/1822/25382

[27]   R. Lameiras, C.Gonçalves, I. Valente,J. Barros, M. Azenha (2013) “Failure modes in filled hole GFRP laminates for connections between FRP and concrete”, 11th International Symposium on Fiber Reinforced Polymers for Reinforced Concrete Structures (FRPRCS-11). June 2013, Guimarães, Portugal – http://hdl.handle.net/1822/26124

[26]   C. Boulay, S. Staquet, M. Azenha, A. e, M. Crespini, J. Carette, J. Granja, B. Delsaute, C. Dumoulin, G. Karaiskos (2013) “Monitoring of elastic properties of concrete since very early age by means of cyclic loadings, ultrasonic measurements, natural resonant frequency of composite beam (EMM-ARM) and with smart aggregates”, FRAMCOS-8, 8th International Conference on Fracture Mechanics of Concrete and Concrete Structures, March 2013, Toledo, Spain – http://hdl.handle.net/1822/26204

[25]  J. Silva, M. Azenha, A. Gomes Correia, (2012) “An innovative approach for continuous measurement of cemented sand stiffness immediately after layer compaction”, 2nd International Conference on Transportation Geotechnics. Hokkaido, Japan 2012. p. 629-34, DOI: 10.1201/b12754-95 – http://hdl.handle.net/1822/22236

[24]   R. Lameiras, J. Barros, M. Azenha (2012) “Conception of sandwich structural panels comprising thin walled steel fibre reinforced self-compacting concrete (SFRSCC) and fibre reinforced polymer (FRP) connectors” BEFIB2012, 8th RILEM International Symposium on Fibre Reinforced Concrete, 19-21st September 2012, Guimarães, Portugal – http://hdl.handle.net/1822/21584

[23]   R. Lameiras, I. Valente, J. Barros, M. Azenha, Ferreira P. (2012) “Fibre reinforced polymer (FRP) connectors for steel fibre reinforced self-compacting concrete (SFRSCC) sandwich panels”. CICE 2012 6th International Conference on FRP Composites in Civil Engineering, 2012, Rome. CICE2012, 2012 – http://hdl.handle.net/1822/21569

[22]   R. Lameiras, M. Azenha, J. Barros (2012) “Optimization of mass concrete construction phasing: Case study of the channel of a dam spillway” (In Portuguese). DAM WORLD 2012 International Conference, 8-11th October 2012, Maceió, Brazil – http://hdl.handle.net/1822/21580

[21]   F. Gomes, F. Souza, M. Azenha, J. Conceição, R. Faria (2012) “Monitoring and 3D thermal modeling of the spiral casing of Batalha Hydroeletric power plant since its early ages”. DAM WORLD 2012 International Conference, 8-11th October 2012, Maceió, Brazil – http://hdl.handle.net/1822/21606

[20]   L. Leitão, M. Azenha, C.F. Sousa, R. Faria (2012) “Use of FEM to assess shrinkage cracking in restrained concrete structures”. SSCS2012 – Numerical modelling strategies for sustainable concrete structures, May-June 2012, Aix-en-Provence, France – http://hdl.handle.net/1822/21604

[19]   M. Azenha, R. Lameiras, J. Barros, A. Costa (2012) “Construction phasing of a dam spillway: thermo-mechanical simulation”. SSCS2012 – Numerical modelling strategies for sustainable concrete structures, May-June 2012, Aix-en-Provence, France – http://hdl.handle.net/1822/21469

[18]   M. Azenha, R. Faria, (2012) “Issues on monitoring and simulating the thermo-mechanical behaviour of concrete since early ages”. Workshop CONCRACK3 – Crack control of mass concrete and related issues concerning early-age of concrete structures, March 2012, Paris, France pp123-132 – http://hdl.handle.net/1822/21607

[17]   R. Aguilar, L. Ramos, M. Azenha (2012) “The Use of Continuous System Identification for evaluation of concrete E-modulus evolution: Laboratory and field applications”. International Modal Analysis Conference, IMAC-XXIX, Jacksonville, USA, Vol. 6, pp. 433-442 – http://hdl.handle.net/1822/21845

[16]   L. Leitão, R. Faria, M. Azenha, C.F.Sousa (2011) “Nonlinear modelling of shrinkage-induced deformations on RC retaining walls”. International Conference on Recent Advances in Nonlinear Models – Structural Concrete Applications – CoRAN 2011, Coimbra, Portugal – http://hdl.handle.net/1822/21616

[15]   M. Azenha, R. Faria, F. Magalhães, L. Ramos, A. Cunha (2011) “Continuous monitoring of cement paste E-modulus since casting: a method based on modal identification” International Conference on Advances in Construction Materials through Science and Engineering 2011 (RILEM) – September 2011, Hong-Kong, China – http://hdl.handle.net/1822/13575

[14]   A. Sá, M. Azenha, H. Sousa, A. Samagaio (2011) “Smart PCM-based coatings for enhanced thermal comfort in buildings” 7th International Conference on Diffusion In Solids and Liquids – DSL-2011, June 2011, Vilamoura, Portugal (extended abstract and presentation only)

[13]   A. Sá, H. Sousa, A. Samagaio, M. Azenha (2011) “Composite coating based on the incorporation of PCM into cement based rendering mortars” 7th International Conference on Diffusion In Solids and Liquids – DSL-2011, June 2011, Vilamoura, Portugal (extended abstract and poster only)

[12]   L. Maia, M. Azenha, R. Faria, J.A. Figueiras (2011) “Elasticity Modulus Monitoring Through an Ambient Vibration Response Method – Application to Cement Based Pastes” International Symposium on Nondestructive Testing of Materials and Structures 2011 – May 2fendi011, Istambul, Turkey. – http://hdl.handle.net/1822/13576

[11]   R. Aguilar, L. Ramos, M. Azenha (2011) “Automatic System Identification Algorithm for Processing Ambient Vibration Data” IOMAC’11 – 4th International Operational Modal Analysis Conference – May 2011, Istambul, Turkey – http://hdl.handle.net/1822/14821

[10]   M. Azenha, F. Magalhães, R. Faria, A.Cunha (2010) “New method for continuous monitoring of concrete E-modulus since casting using an output-only modal identification technique” CONSEC10 – Sixth International Conference on Concrete under Severe Conditions. Environment and Loading. June 2010, Mérida, Mexico – http://hdl.handle.net/1822/13567

[9]     M. Azenha, R. Faria, C. Sousa (2009) “Hygro-mechanical simulation of drying shrinkage in concrete elements” (in Portuguese) METNUM09 – Congreso de Métodos Numéricos en Ingeniería 2009, Barcelona, Spain. – http://hdl.handle.net/1822/13579

[8]     D. Ferreira, M. Azenha, R. Faria (2008) “Parametric study of the influence of heat curing methods in residual stresses of precast bridge beams” Challenges for Civil Construction CCC2008, Porto, Portugal

[7]     M. Azenha, C.F. Sousa, R. Faria (2008) “Numerical analysis of a RC slab considering the combined effect of self induced stresses and external loads” CONCREEP 2008 – 8th International Conference on Creep, Shrinkage and Durability of Concrete, Ise Shima, Japan

[6]     M. Azenha, R. Faria, K. Maekawa (2007) “Influence of moisture losses at early ages on concrete cover quality: A numerical approach.” International RILEM workshop on integral service life modelling of concrete structures, Guimarães, Portugal.

[5]     M. Azenha, L.G. Silva, R. Faria, J.A. Figueiras (2006) “Numerical simulation of the restrained concrete shrinkage in the ring test” (in Portuguese). Proc. VI Simpósio EPUSP Sobre Estruturas de Concreto, São Paulo, Brasil.

[4]     M. Azenha, R. Faria, J. A. Figueiras (2006) “Thermo-Mechanical Analysis of Young Concrete. Application to a Restrained Slab”. Proc. S. P. Shah Symposium “Measuring, Monitoring and Modeling Concrete Properties” (within the 16th European Conference of Fracture), Alexandroupolis, Greece.

[3]     M. Azenha, R. Faria, K. Maekawa (2006) “Numerical simulation of concrete structural behavior at early ages” Proc. 6th International PhD Symposium in Civil Engineering 2006, CD-ROM, Zurich, Switzerland.

[2]     M. Azenha, R. Faria, J. A. Figueiras (2005) “Restrained Concrete Ring Test: Experimental Campaign and Numerical Simulation” Proc. International Conference on Concrete for Structures, FCTUC, Coimbra, pp. 137 144.

[1]     M. Azenha, R. Faria (2004) “Risk of Concrete Cracking at Early Ages” (in Portuguese). Proc. 46º Congresso Brasileiro do Concreto (CD ROM), Florianópolis, Brasil